The Industry Division of Geenbellon Group, LLC

Your position > HOME

Products List

Detail Information

STD ANSI 1500# (±0.5%) Flanged Turbine Flow Meter

^$2289BASIC
Geenbellon Turbine Flow Meters can measure Instantanous Flow Rate and Accumulated Flow in a closed pipe system and display these data in Volume Unit in same time. The theory of this type flow meter is that the flowing medium engages a vaned rotor causing it to rotate at an angular velocity proportional to the flow rate Within the turbine flow meter. The pickup coil senses the spinning motion of the rotor through the housing and converts it into a pulsing electrical signal. Totalling the pulsing electrical signal directly yields to the total flow, while the frequency is linearly related to the flow rate. The flow meter is featured that it is tough for an applications in severe condition with high accuracy, light weight, interface flexible, anti-abrasive, and anticorrosive. So, it is applied widely in the field of Industry, Municipal, Agriculture, Military engineering.

Geenbellon Turbine Flow Meters are available in a variety of end connections. They are Flanged, Between-Flanged (BF), Grooved, Threaded, Tri-Clover, Weco, GrayLoc, Union, Drillpipe, BigInch etc.
Geenbellon Turbine Flow Meters with ANSI flanged end connections are available in both raised-face (RF 150# to 1500#) models and ring-type joint (RTJ 600# to 2500#) models in Standard ANSI B16.5. Geenbellon routinely supplies other type flange end connections including DIN, API and a variety of proprietary flange and clamp end connections especially for high pressure services. Consult Geenbellon for any specific requirement.
Flanged materials can be carbon steel or stainless steel. All flanged Geenbellon meters are equipped with slip-on flanges, which are then welded to the outside of the meter rather than being welded to the end of the meter body. Thus, the flange never comes into contact with the fluid being measured.
This webpage will be instructing on ANSI 1500# flanegd Turbine Flow Meters.

Features
*Standard ANSI Flange Connection, Easy to install and uninstall in a pipe line and easy to find the mating material. .
*The Max working pressure ANSI 1500# flange 3705PSi (25.5MPa)
*the Tungsten Carbide/Ceramic hybrid ball bearings & shaft extend much longer of the usage life of Flow meter
*High accuracy and High accuracy repeatable measurement
*Rugged structure to withstand continual rig up/down
*Most economical solution for flow measurement applications
*High frequency digital output easy interface with other digital equipment.
*Symmetrical Bi-directional Design
*Wide temperature & Pressure Ranges
*Wide flow range (Typically 15:1-100:1)
*Minimum maintenance
*Long service life, even in severe applications

Application
@ Water & dirty water measurement
@ Disposal wells
@ fuel and feed water
@ liquid fertilizer
@ fuel and chemical measurement in many field.
@ liquid propane
@ mining and leaching

Medium for Measured

Technical Parameters
Accuracy: +/- 0.5%
Repeatable: +/- 0.05%
End Connection: ANSI SS/CS 1500# Flange
Working Pressure: Max.3705 PSi (25.5MPa) @ 20 ℃
Working Tempreture: -65 to 450 ℉ (-55 to 232 ℃)
Pickup Connection: AN3106A-10SL-4S/3S (MIL STD Two/Three Holes Plug)
Magnetic Sensors: 1ea/2ea(Optional) Provide the STD signal for loacal/romote diaplay equipment.
@Structure of Internal repair Kits: Y Serial
@Material
      Body: Stainless Steel 304/316L (Depend on the fluid measured)
      Vane: 304/316L
      Shaft&Bearing: Tungsten Carbide
@Pickup:
     Body: 300 Serial Stainless Steel
Compliance
     *CSA Certified Harzardous Locations Class I, Group A,B,C,D,Div.1
     *NACE MR01-75(NACE traceability available on request.)

Meter Size Selection
Geenbellon Turbine Flow Meters bore size selection do not depend on size of the pipe-line the meter will be mounted in, it must be decided on the instantaneous flow rate in the pipe-line.

Note: 1.The data above is based on Water-Calibration.
2. The best linear flow range for Non-lubricating Liquid is at upper 60% of the standard range.
3. Consult factory for engineering assistance when the viscosities of the liquids measured greater than 5 centistokes.

ANSI B16.5 Flanges Selection

Model No. Definition
Note：①. Model No. is composed of letters plus numbers alternatively & regularly. ②. There are no any conflicts between the various elements of the model to be allowed. For example, the selection of high temperature turbine body in previous position, the following position is the choice of standard temperature pickups. As to detailed information, please refer to the related section in manual or enquires with the manufacturers. ③. When you select more than 1 pickup and flow analyzer to work at the same time, in the No. 9 and No. 10 position, express method is flow analyzer model & installation mode + ... ④. In order to save costs, Geenbellon assists the user make a basic options selection on flow analyzer and flow computer under common conditions. If having special needs, marked ( ) with the corresponding position of the model, while the technical details is required to list in the technical agreement, quotation or contract.

Installation Diagram

Related Document
GIL-Products-List Model-Selecting-Sheet

Word Explanation
STD = Standard Type || ACC = Accuracy || Size = Nominal Bore Size || End = End Connction Size || Flow = Flow Range || GPM = Gallon Per Minute || M3.H = Cubic Meter Per Hour || WT = Weight in Kilogram
RFSS = Stainless Steel Flange w/Raised Face, the size of flange is 150#, 300#, 600#, 900#, 1500#, 2500#
RFCS = Carbon Steel Flange w/Ring Joint, the size of flange is 600#, 900#, 1500#, 2500#
RJSS = Stainless Steel Flange w/Raised Face, the size of flange is 150#, 300#, 600#, 900#, 1500#, 2500#
RJCS = Carbon Steel Flange w/Ring Joint, the size of flange is 600#, 900#, 1500#, 2500#

Model	Model Description	Part No.	Quantity
FT3/8x1/2SF15Q01A2	Size3/8",End1/2",RFSS,ACC±0.5%,Flow0.3-3GPM/0.067-0.67M3.H,WT6.7Kg	200000825
FT1/2SF15Q01A2	Size1/2",RFSS,ACC±0.5%,Flow0.75-7.5GPM/0.167-1.67M3.H,WT6.7Kg	200000826
FT3/4SF15Q01A2	Size3/4",RFSS,ACC±0.5%,Flow2-15GPM/0.45-3.41M3.H,WT6.7Kg	200000827
FT7/8x1SF15Q01A2	Size7/8",End1",RFSS,ACC±0.5%,Flow3-30GPM/0.67-6.8H,WT8.2Kg	200000828
FT1SF15Q01A2	Size1",RFSS,ACC±0.5%,Flow5-50GPM/1-11M3.H,WT8.2Kg	200000829
FT1.5SF15Q01A2	Size1.5",RFSS,ACC±0.5%,Flow15-180/3-41M3.H,WT19.1Kg	200000830
FT2SF15Q01A2	Size2",RFSS,ACC±0.5%,Flow40-400GPM/9-90M3.H,WT29.5Kg	200000831
FT3SF15Q01A2	Size3",RFSS,ACC±0.5%,Flow80-800GPM/18-181M3.H,WT52.2Kg	200000832
FT4SF15Q01A2	Size4",RFSS,ACC±0.5%,Flow100-1200GPM/23-271M3.H,WT77.2Kg	200000833
FT6SF15Q01A2	Size6",RFSS,ACC±0.5%,,Flow200-2500GPM/45-583M3.H,WT168Kg	200000834
FT8SF15Q01A2	Size8",RFSS,ACC±0.5%,Flow350-3500GPM/79-795M3.H,WT254.24Kg	200000835
FT10SF15Q01A2	Size10",RFSS,ACC±0.5%,Flow500-5000GPM/114-1140M3.H,WT268.9Kg	200000836
FT3/8x1/2CF15Q01A2	Size3/8",End1/2",RFCS,ACC±0.5%,Flow0.3-3GPM/0.067-0.67M3.H,WT6.7Kg	200000837
FT1/2CF15Q01A2	Size1/2",RFCS,ACC±0.5%,Flow0.75-7.5GPM/0.167-1.67M3.H,WT6.7Kg	200000838
FT3/4CF15Q01A2	Size3/4",RFCS,ACC±0.5%,Flow2-15GPM/0.45-3.41M3.H,WT6.7Kg	200000839
FT7/8x1CF15Q01A2	Size7/8",End1",RFCS,ACC±0.5%,Flow3-30GPM/0.6-6.8M3.H,WT8.2Kg	200000840
FT1CF15Q01A2	Size1",RFCS,ACC±0.5%,Flow5-50GPM/1-11M3.H,WT8.2Kg	200000841
FT1.5CF15Q01A2	Size1.5",RFCS,ACC±0.5%,Flow15-180/3-41M3.H,WT19.1Kg	200000842
FT2CF15Q01A2	Size2",RFCS,ACC±0.5%,Flow40-400GPM/9-90M3.H,WT29.5Kg	200000843
FT3CF15Q01A2	Size3",RFCS,ACC±0.5%,Flow80-800GPM/18-181M3.H,WT52.2Kg	200000844
FT4CF15Q01A2	Size4",RFCS,ACC±0.5%,,Flow100-1200GPM/23-271M3.H,WT90.8Kg	200000845
FT6CF15Q01A2	Size6",RFCS,ACC±0.5%,,Flow200-2500GPM/45-583M3.H,WT168.0Kg	200000846
FT8CF15Q01A2	Size8",RFCS,ACC±0.5%,,Flow350-3500GPM/79-795M3.H,WT254.24Kg	200000847
FT10CF15Q01A2	Size10",RFCS,ACC±0.5%,Flow500-5000GPM/114-1140M3.H,WT268.9Kg	200000848
FT3/8x1/2SJ15Q01A2	Size3/8",End1/2",RJSS,ACC±0.5%,Flow0.3-3GPM/0.067-0.67M3.H,WT6.7Kg	200000849
FT1/2SJ15Q01A2	Size1/2",RJSS,ACC±0.5%,Flow0.75-7.5GPM/0.167-1.67M3.H,WT6.7Kg	200000850
FT3/4SJ15Q01A2	Size3/4",RJSS,ACC±0.5%,Flow2-15GPM/0.45-3.41M3.H,WT6.7Kg	200000851
FT7/8x1SJ15Q01A2	Size7/8",End1",RJSS,ACC±0.5%,Flow3-30GPM/0.67-6.8H,WT8.2Kg	200000852
FT1SJ15Q01A2	Size1",RJSS,ACC±0.5%,Flow5-50GPM/1-11M3.H,WT8.2Kg	200000853
FT1.5SJ15Q01A2	Size1.5",RJSS,ACC±0.5%,Flow15-180/3-41M3.H,WT19.1Kg	200000854
FT2SJ15Q01A2	Size2",RJSS,ACC±0.5%,Flow40-400GPM/9-90M3.H,WT29.5Kg	200000855
FT3SJ15Q01A2	Size3",RJSS,ACC±0.5%,Flow80-800GPM/18-181M3.H,WT52.2Kg	200000856
FT4SJ15Q01A2	Size4",RJSS,ACC±0.5%,Flow100-1200GPM/23-271M3.H,WT77.2Kg	200000857
FT6SJ15Q01A2	Size6",RJSS,ACC±0.5%,,Flow200-2500GPM/45-583M3.H,WT168.0Kg	200000858
FT8SJ15Q01A2	Size8",RJSS,ACC±0.5%,Flow350-3500GPM/79-795M3.H,WT254.24Kg	200000859
FT10SJ15Q01A2	Size10",RJSS,ACC±0.5%,Flow500-5000GPM/114-1140M3.H,WT268.9Kg	200000860
FT3/8x1/2CJ15Q01A2	Size3/8",End1/2",RJCS,ACC±0.5%,Flow0.3-3GPM/0.067-0.67M3.H,WT6.7Kg	200000861
FT1/2CJ15Q01A2	Size1/2",RJCS,ACC±0.5%,Flow0.75-7.5GPM/0.167-1.67M3.H,WT6.7Kg	200000862
FT3/4CJ15Q01A2	Size3/4",RJCS,ACC±0.5%,Flow2-15GPM/0.45-3.41M3.H,WT6.7Kg	200000863
FT7/8x1CJ15Q01A2	Size7/8",End1",RJCS,ACC±0.5%,Flow3-30GPM/0.6-6.8M3.H,WT8.2Kg	200000864
FT1CJ15Q01A2	Size1",RJCS,ACC±0.5%,Flow5-50GPM/1-11M3.H,WT8.2Kg	200000865
FT1.5CJ15Q01A2	Size1.5",RJCS,ACC±0.5%,Flow15-180/3-41M3.H,WT19.1Kg	200000866
FT2CJ15Q01A2	Size2",RJCS,ACC±0.5%,Flow40-400GPM/9-90M3.H,WT29.5Kg	200000867
FT3CJ15Q01A2	Size3",RJCS,ACC±0.5%,Flow80-800GPM/18-181M3.H,WT52.2Kg	200000868
FT4CJ15Q01A2	Size4",RJCS,ACC±0.5%,,Flow100-1200GPM/23-271M3.H,WT77.2Kg	200000869
FT6CJ15Q01A2	Size6",RJCS,ACC±0.5%,,Flow200-2500GPM/45-583M3.H,WT168.0Kg	200000870
FT8CJ15Q01A2	Size8",RJCS,ACC±0.5%,,Flow350-3500GPM/79-795M3.H,WT254.24Kg	200000871
FT10CJ15Q01A2	Size10",RJCS,ACC±0.5%,Flow500-5000GPM/114-1140M3.H,WT268.9Kg	200000872
If you would like to have a quotation on the products, please input Quantity then click →