The Industry Division of Geenbellon Group, LLC

Your position > HOME

Products List

Detail Information

STD ANSI 900# (+/-0.5%) Flanged Turbine Flow Meter

^$2289BASIC
Geenbellon Turbine Flow Meters can measure the instantaneous flow rate and Accumulated Flow in a closed pipe system and these data are simultaneously in volume unit. The theory of this type of flow meter is that the flowing medium engages a vaned rotor causing it to rotate at an angular velocity proportional to the flow rate Within the turbine flow meter. The pickup coil senses the spinning motion of the rotor through the housing and converts it into a pulsing electrical signal. Totalling the pulsing electrical signal directly yields to the total flow, while the frequency is linearly related to the flow rate. The flow meter is featured that it is tough for an applications in severe condition with high accuracy, light weight, interface flexible, anti-abrasive, and anticorrosive. So, it is applied widely in the field of Industry, Municipal, Agriculture engineering.
.
Geenbellon Turbine Flow Meters are available in a variety of end connections. They are Flanged, Between-Flanged (BF), Grooved, Threaded, Tri-Clover, Weco, GrayLoc, Union, Drillpipe, BigInch etc.
Geenbellon Flanged Turbine Flow Meters have ANSI flanged end connections and in both raised-face (RF 150# to 1500#) models and ring-type joint (RTJ 600# to 2500#) models in Standard ANSI B16.5. Geenbellon routinely supplies other type flange end connections including DIN, API and a variety of proprietary flange and clamp end connections especially for high pressure services. Consult Geenbellon for any specific requirement.
Flanged materials can be carbon steel or stainless steel. All flanged Geenbellon meters are equipped with slip-on flanges, which are then welded to the outside of the meter rather than being welded to the end of the meter body. Thus, the flange never comes into contact with the fluid being measured.
This webpage will be instructing on ANSI 900# flanegd Turbine Flow Meters.

Features
• Standard ANSI Flange Connection, Easy to install and uninstall in a pipe line and easy to find the mating material.
• The Max working pressure ANSI 900# flange 2220Psi (15.3MPa)
•  the Tungsten Carbide/Ceramic hybrid ball bearings & shaft extend much longer of the usage life of Flow meter
•  High accuracy and High accuracy repeatable measurement
•  Rugged structure to withstand continual rig up/down
•  Most economical solution for flow measurement applications
•  High frequency digital output easy interface with other digital equipment.
•  Symmetrical Bi-directional Design
•  Wide temperature & Pressure Ranges
•  Wide flow range (Typically 15:1-100:1)
•  Minimum maintenance
•  Long service life, even in severe applications

Application
@ Water & dirty water measurement
@ Disposal wells
@ fuel and feed water
@ liquid fertilizer
@ fuel and chemical measurement in many field.
@ liquid propane
@ mining and leaching

Medium for Measured

Technical Parameters
Accuracy: +/- 0.5%
Repeatable: +/- 0.05%
End Connection: ANSI SS/CS 900# Flange
Working Pressure: Max.2220Psi (15.3MPa) @20 ℃
Working Temperature: -65 to 450 ℉ (-55 to 232 ℃)
Pickup Connection: AN3106A-10SL-4S/3S (MIL STD Two/Three Holes Plug)
Magnetic Sensors: 1ea/2ea(Optional) Provide the STD signal for loacal/romote diaplay equipment.
@Structure of Internal repair Kits: Y Serial
@Material
Body: Stainless Steel 304/316L (Depend on the fluid measured)
Vane: 304/316L
Shaft&Bearing: Tungsten Carbide
@Pickup:
Body: 300 Serial Stainless Steel
Compliance
* CSA Certified Harzardous Locations Class I, Group A,B,C,D,Div.1
* NACE MR01-75(NACE traceability available on request.)

Meter Size Selection
Geenbellon Turbine Flow Meters bore size selection do not depend on size of the pipe-line the meter will be mounted in, it must be decided on the instantaneous flow rate in the pipe-line.

Note: 1.The data above is based on Water-Calibration.
2. The best linear flow range for Non-lubricating Liquid is at upper 60% of the standard range.
3. Consult factory for engineering assistance when the viscosities of the liquids measured greater than 5 centistokes.

ANSI B16.5 Flanges Selection

Model No. Definition

Note：①. Model No. is composed of letters plus numbers alternatively & regularly. ②. There are no any conflicts between the various elements of the model to be allowed. For example, the selection of high temperature turbine body in previous position, the following position is the choice of standard temperature pickups. As to detailed information, please refer to the related section in manual or enquires with the manufacturers. ③. When you select more than 1 pickup and flow analyzer to work at the same time, in the No. 9 and No. 10 position, express method is flow analyzer model & installation mode + ... ④. In order to save costs, Geenbellon assists the user in making a basic options selection on flow analyzer and flow computer under common conditions. If having special needs, marked ( ) with the corresponding position of the model, while the technical details is required to list in the technical agreement, quotation or contract.

Installation Diagram

Accessories for Installation of Flow Meter

1) Flanges & Bolts 2) Straightener 3) Strainer 4) Gas elimination device

Related Document
GIL-Products-List Model-Selecting-Sheet

Words Explanation
STD = Standard Type || ACC = Accuracy || Size = Nominal Bore Size || End = End Connction Size || Flow = Flow Range || GPM = Gallon Per Minute || M3.H = Cubic Meter Per Hour || WT = Weight in Kilogram
RFSS = Stainless Steel Flange w/Raised Face, the size of flange is 150#, 300#, 600#, 900#, 1500#, 2500#
RFCS = Carbon Steel Flange w/Ring Joint, the size of flange is 600#, 900#, 1500#, 2500#
RJSS = Stainless Steel Flange w/Raised Face, the size of flange is 150#, 300#, 600#, 900#, 1500#, 2500#
RJCS = Carbon Steel Flange w/Ring Joint, the size of flange is 600#, 900#, 1500#, 2500#

Model	Model Description	Part No.	Quantity
FT3/8x1/2SF9Q01A2	Size3/8",End1/2",RFSS,ACC±0.5%,Flow0.3-3GPM/0.067-0.67M3.H,WT6.7Kg	200000777
FT1/2SF9Q01A2	Size1/2",RFSS,ACC±0.5%,Flow0.75-7.5GPM/0.167-1.67M3.H,WT6.7Kg	200000778
FT3/4SF9Q01A2	Size3/4",RFSS,ACC±0.5%,Flow2-15GPM/0.45-3.41M3.H,WT6.7Kg	200000779
FT7/8x1SF9Q01A2	Size7/8",End1",RFSS,ACC±0.5%,Flow3-30GPM/0.67-6.8H,WT8.2Kg	200000780
FT1SF9Q01A2	Size1",RFSS,ACC±0.5%,Flow5-50GPM/1-11M3.H,WT8.2Kg	200000781
FT1.5SF9Q01A2	Size1.5",RFSS,ACC±0.5%,Flow15-180/3-41M3.H,WT19.10Kg	200000782
FT2SF9Q01A2	Size2",RFSS,ACC±0.5%,Flow40-400GPM/9-90M3.H,WT29.50Kg	200000783
FT3SF9Q01A2	Size3",RFSS,ACC±0.5%,Flow80-800GPM/18-181M3.H,WT38.0Kg	200000784
FT4SF9Q01A2	Size4",RFSS,ACC±0.5%,Flow100-1200GPM/23-271M3.H,WT59.0Kg	200000785
FT6SF9Q01A2	Size6",RFSS,ACC±0.5%,,Flow200-2500GPM/45-583M3.H,WT118.1Kg	200000786
FT8SF9Q01A2	Size8",RFSS,ACC±0.5%,Flow350-3500GPM/79-795M3.H,WT181.6Kg	200000787
FT10SF9Q01A2	Size10",RFSS,ACC±0.5%,Flow500-5000GPM/114-1140M3.H,WT195.3Kg	200000788
FT3/8x1/2CF9Q01A2	Size3/8",End1/2",RFCS,ACC±0.5%,Flow0.3-3GPM/0.067-0.67M3.H,WT6.7Kg	200000789
FT1/2CF9Q01A2	Size1/2",RFCS,ACC±0.5%,Flow0.75-7.5GPM/0.167-1.67M3.H,WT6.7Kg	200000790
FT3/4CF9Q01A2	Size3/4",RFCS,ACC±0.5%,Flow2-15GPM/0.45-3.41M3.H,WT6.7Kg	200000791
FT7/8x1CF9Q01A2	Size7/8",End1",RFCS,ACC±0.5%,Flow3-30GPM/0.6-6.8M3.H,WT8.2Kg	200000792
FT1CF9Q01A2	Size1",RFCS,ACC±0.5%,Flow5-50GPM/1-11M3.H,WT8.2Kg	200000793
FT1.5CF9Q01A2	Size1.5",RFCS,ACC±0.5%,Flow15-180/3-41M3.H,WT19.10Kg	200000794
FT2CF9Q01A2	Size2",RFCS,ACC±0.5%,Flow40-400GPM/9-90M3.H,WT29.50Kg	200000795
FT3CF9Q01A2	Size3",RFCS,ACC±0.5%,Flow80-800GPM/18-181M3.H,WT38.0Kg	200000796
FT4CF9Q01A2	Size4",RFCS,ACC±0.5%,,Flow100-1200GPM/23-271M3.H,WT59.0Kg	200000797
FT6CF9Q01A2	Size6",RFCS,ACC±0.5%,,Flow200-2500GPM/45-583M3.H,WT118.1Kg	200000798
FT8CF9Q01A2	Size8",RFCS,ACC±0.5%,,Flow350-3500GPM/79-795M3.H,WT181.6Kg	200000799
FT10CF9Q01A2	Size10",RFCS,ACC±0.5%,Flow500-5000GPM/114-1140M3.H,WT195.3Kg	200000800
FT3/8x1/2SJ9Q01A2	Size3/8",End1/2",RJSS,ACC±0.5%,Flow0.3-3GPM/0.067-0.67M3.H,WT6.7Kg	200000801
FT1/2SJ9Q01A2	Size1/2",RJSS,ACC±0.5%,Flow0.75-7.5GPM/0.167-1.67M3.H,WT6.7Kg	200000802
FT3/4SJ9Q01A2	Size3/4",RJSS,ACC±0.5%,Flow2-15GPM/0.45-3.41M3.H,WT6.7Kg	200000803
FT7/8x1SJ9Q01A2	Size7/8",End1",RJSS,ACC±0.5%,Flow3-30GPM/0.67-6.8H,WT8.2Kg	200000804
FT1SJ9Q01A2	Size1",RJSS,ACC±0.5%,Flow5-50GPM/1-11M3.H,WT8.2Kg	200000805
FT1.5SJ9Q01A2	Size1.5",RJSS,ACC±0.5%,Flow15-180/3-41M3.H,WT19.10Kg	200000806
FT2SJ9Q01A2	Size2",RJSS,ACC±0.5%,Flow40-400GPM/9-90M3.H,WT29.50Kg	200000807
FT3SJ9Q01A2	Size3",RJSS,ACC±0.5%,Flow80-800GPM/18-181M3.H,WT38.0Kg	200000808
FT4SJ9Q01A2	Size4",RJSS,ACC±0.5%,Flow100-1200GPM/23-271M3.H,WT59.0Kg	200000809
FT6SJ9Q01A2	Size6",RJSS,ACC±0.5%,,Flow200-2500GPM/45-583M3.H,WT118.1Kg	200000810
FT8SJ9Q01A2	Size8",RJSS,ACC±0.5%,Flow350-3500GPM/79-795M3.H,WT181.6Kg	200000811
FT10SJ9Q01A2	Size10",RJSS,ACC±0.5%,Flow500-5000GPM/114-1140M3.H,WT195.3Kg	200000812
FT3/8x1/2CJ9Q01A2	Size3/8",End1/2",RJCS,ACC±0.5%,Flow0.3-3GPM/0.067-0.67M3.H,WT6.7Kg	200000813
FT1/2CJ9Q01A2	Size1/2",RJCS,ACC±0.5%,Flow0.75-7.5GPM/0.167-1.67M3.H,WT6.7Kg	200000814
FT3/4CJ9Q01A2	Size3/4",RJCS,ACC±0.5%,Flow2-15GPM/0.45-3.41M3.H,WT6.7Kg	200000815
FT7/8x1CJ9Q01A2	Size7/8",End1",RJCS,ACC±0.5%,Flow3-30GPM/0.6-6.8M3.H,WT8.2Kg	200000816
FT1CJ9Q01A2	Size1",RJCS,ACC±0.5%,Flow5-50GPM/1-11M3.H,WT8.2Kg	200000817
FT1.5CJ9Q01A2	Size1.5",RJCS,ACC±0.5%,Flow15-180/3-41M3.H,WT19.10Kg	200000818
FT2CJ9Q01A2	Size2",RJCS,ACC±0.5%,Flow40-400GPM/9-90M3.H,WT29.50Kg	200000819
FT3CJ9Q01A2	Size3",RJCS,ACC±0.5%,Flow80-800GPM/18-181M3.H,WT38.0Kg	200000820
FT4CJ9Q01A2	Size4",RJCS,ACC±0.5%,,Flow100-1200GPM/23-271M3.H,WT59.0Kg	200000821
FT6CJ9Q01A2	Size6",RJCS,ACC±0.5%,,Flow200-2500GPM/45-583M3.H,WT118.1Kg	200000822
FT8CJ9Q01A2	Size8",RJCS,ACC±0.5%,,Flow350-3500GPM/79-795M3.H,WT181.6Kg	200000823
FT10CJ9Q01A2	Size10",RJCS,ACC±0.5%,Flow500-5000GPM/114-1140M3.H,WT195.3Kg	200000824
If you would like to have a quotation on the products, please input Quantity then click →