The Industry Division of Geenbellon Group, LLC

Your position > HOME

Products List

Detail Information

STD ANSI-2500#(±1.0%) Flanged Turbine Flow Meters

^$1995BASIC
Geenbellon Turbine Flow Meters can measure Instantanous Flow Rate and Accumulated Flow in a closed pipe system and display these data in Volume Unit in same time. The theory of this type flow meter is that the flowing medium engages a vaned rotor causing it to rotate at an angular velocity proportional to the flow rate Within the turbine flow meter. The pickup coil senses the spinning motion of the rotor through the housing and converts it into a pulsing electrical signal. Totalling the pulsing electrical signal directly yields to the total flow, while the frequency is linearly related to the flow rate. The flow meter is featured that it is tough for an applications in severe condition with high accuracy, light weight, interface flexible, anti-abrasive, and anticorrosive. So, it is applied widely in the field of Industry, Municipal, Agriculture, Military engineering.

Geenbellon Turbine Flow Meters are available in a variety of end connections. They are Flanged, Between-Flanged (BF), Grooved, Threaded, Tri-Clover, Weco, GrayLoc, Union, Drillpipe, BigInch etc.
Geenbellon Turbine Flow Meters with ANSI flanged end connections are available in both raised-face (RF 150# to 1500#) models and ring-type joint (RTJ 600# to 2500#) models in Standard ANSI B16.5. Geenbellon routinely supplies other type flange end connections including DIN, API and a variety of proprietary flange and clamp end connections especially for high pressure services. Consult Geenbellon for any specific requirement.
Flanged materials can be carbon steel or stainless steel. All flanged Geenbellon meters are equipped with slip-on flanges, which are then welded to the outside of the meter rather than being welded to the end of the meter body. Thus, the flange never comes into contact with the fluid being measured.
This webpage will be instructing on ANSI 2500# flanegd Turbine Flow Meters with Accuracy 1.0 Grade.

Features
· Standard ANSI Flange Connection, Easy to install and uninstall in a pipe line and easy to find the mating material.
· Max working pressure ANSI 2500# flange 6170PSi (42.5MPa)
· Tungsten carbide/ceramic hybrid ball bearings & shaft extend much longer of the usage life of Flow meter
· High accuracy and high accuracy repeatable measurement
· Rugged structure to withstand continual rig up/down
· Most economical solution for flow measurement applications
· High frequency digital output easy interface with other digital equipment.
· Symmetrical Bi-directional Design
· Wide temperature & Pressure ranges
· Wide flow range (Typically 15:1-100:1)
· Minimum maintenance
· Long service life, even in severe applications
Application
· Water & dirty water measurement
· Disposal wells
· Fuel and feed water
· Liquid fertilizer
· Fuel and chemical measurement in many field.
· Liquid propane
· Mining and leaching

Medium for Measured

Technical Parameters
Accuracy: +/- 0.5%
Repeatable: +/- 0.05%
End Connection: ANSI SS/CS 2500# Flange
Working Pressure: Max.6170 PSi (42.5MPa) @ 20℃
Working Tempreture: -65 to 450 ℉ (-55 to 232 ℃)
Pickup Connection: AN3106A-10SL-4S/3S (MIL STD Two/Three Holes Plug)
Magnetic Sensors: 1ea/2ea(Optional) Provide the STD signal for loacal/romote diaplay equipment.
@Structure of Internal repair Kits: Y Serial
@Material
    Body: Stainless Steel 304/316L (Depend on the fluid measured)
    Vane: 304/316L
    Shaft&Bearing: Tungsten Carbide
@Pickup:
    Body: 300 Serial Stainless Steel
Compliance
*CSA Certified Harzardous Locations Class I, Group A,B,C,D,Div.1
*NACE MR01-75(NACE traceability available on request.)
Meter Size Selection
Geenbellon Turbine Flow Meters bore size selection do not depend on size of the pipe-line the meter will be mounted in, it must be decided on the instantaneous flow rate in the pipe-line.

Note: 1.The data above is based on Water-Calibration.
         2. The best linear flow range for Non-lubricating Liquid is at upper 60% of the standard range.
         3. Consult factory for engineering assistance when the viscosities of the liquids measured greater than 5 centistokes.
ANSI B16.5 Flanges Selection

Model No. Definition

Note：①. Model No. is composed of letters plus numbers regularly. ②. There are not conflicts between the various elements of the model cannot be allowed. For example, the selection of high temperature turbine body in previous position, the following position is the choice of standard temperature pickups. As to detailed information, please refer to the related section in manual or enquires with the manufacturers. ③. When you select more than 1 pickup and flow analyzer to work at the same time, in the No. 9 and No. 10 position, express method is flow analyzer model & installation mode + ... ④. In order to save costs, Geenbellon assists the user make a basic options selection on flow analyzer and flow computer under common conditions. If having special needs, marked ( ) with the corresponding position of the model, while the technical details is required to list in the technical agreement, quotation or contract.
Installation Diagram

Related Document
GIL-Products-List      Model-Selecting-Sheet

Word Explanation
STD = Standard Type || ACC = Accuracy || Size = Nominal Bore Size || End = End Connction Size || Flow = Flow Range || GPM = Gallon Per Minute || M3.H = Cubic Meter Per Hour || WT = Weight in Kilogram
RFSS = Stainless Steel Flange w/Raised Face, the size of flange is 150#, 300#, 600#, 900#, 1500#, 2500#
RFCS = Carbon Steel Flange w/Ring Joint, the size of flange is 600#, 900#, 1500#, 2500#
RJSS = Stainless Steel Flange w/Raised Face, the size of flange is 150#, 300#, 600#, 900#, 1500#, 2500#
RJCS = Carbon Steel Flange w/Ring Joint, the size of flange is 600#, 900#, 1500#, 2500#

Model	Model Description	Part No.	Quantity
FT3/8x1/2SF25Q01	Size3/8",End1/2",RFSS,ACC±1.0%,Flow0.3-3GPM/0.067-0.67M3.H,WT15.3Kg	200001113
FT1/2SF25Q01	Size1/2",RFSS,ACC±1.0%,Flow0.75-7.5GPM/0.167-1.67M3.H,WT15.3Kg	200001114
FT3/4SF25Q01	Size3/4",RFSS,ACC±1.0%,Flow2-15GPM/0.45-3.41M3.H,WT15.3Kg	200001115
FT7/8x1SF25Q01	Size7/8",End1",RFSS,ACC±1.0%,Flow3-30GPM/0.67-6.8H,WT18.16Kg	200001116
FT1SF25Q01	Size1",RFSS,ACC±1.0%,Flow5-50GPM/1-11M3.H,WT18.16Kg	200001117
FT1.5SF25Q01	Size1.5",RFSS,ACC±1.0%,Flow15-180/3-41M3.H,WT27.2Kg	200001118
FT2SF25Q01	Size2",RFSS,ACC±1.0%,Flow40-400GPM/9-90M3.H,WT36.32Kg	200001119
FT3SF25Q01	Size3",RFSS,ACC±1.0%,Flow80-800GPM/18-181M3.H,WT56.75Kg	200001120
FT4SF25Q01	Size4",RFSS,ACC±1.0%,Flow100-1200GPM/23-271M3.H,WT83.99Kg	200001121
FT6SF25Q01	Size6",RFSS,ACC±1.0%,,Flow200-2500GPM/45-583M3.H,WT177.1Kg	200001122
FT8SF25Q01	Size8",RFSS,ACC±1.0%,Flow350-3500GPM/79-795M3.H,WT272.4Kg	200001123
FT10SF25Q01	Size10",RFSS,ACC±1.0%,Flow500-5000GPM/114-1140M3.H,WT290.8Kg	200001124
FT3/8x1/2CF25Q01	Size3/8",End1/2",RFCS,ACC±1.0%,Flow0.3-3GPM/0.067-0.67M3.H,WT15.3Kg	200001125
FT1/2CF25Q01	Size1/2",RFCS,ACC±1.0%,Flow0.75-7.5GPM/0.167-1.67M3.H,WT15.3Kg	200001126
FT3/4CF25Q01	Size3/4",RFCS,ACC±1.0%,Flow2-15GPM/0.45-3.41M3.H,WT15.3Kg	200001127
FT7/8x1CF25Q01	Size7/8",End1",RFCS,ACC±1.0%,Flow3-30GPM/0.6-6.8M3.H,WT18.16Kg	200001128
FT1CF25Q01	Size1",RFCS,ACC±1.0%,Flow5-50GPM/1-11M3.H,WT18.16Kg	200001129
FT1.5CF25Q01	Size1.5",RFCS,ACC±1.0%,Flow15-180/3-41M3.H,WT27.2Kg	200001130
FT2CF25Q01	Size2",RFCS,ACC±1.0%,Flow40-400GPM/9-90M3.H,WT36.32Kg	200001131
FT3CF25Q01	Size3",RFCS,ACC±1.0%,Flow80-800GPM/18-181M3.H,WT56.75Kg	200001132
FT4CF25Q01	Size4",RFCS,ACC±1.0%,,Flow100-1200GPM/23-271M3.H,WT83.99Kg	200001133
FT6CF25Q01	Size6",RFCS,ACC±1.0%,,Flow200-2500GPM/45-583M3.H,WT177.1Kg	200001134
FT8CF25Q01	Size8",RFCS,ACC±1.0%,,Flow350-3500GPM/79-795M3.H,WT272.44Kg	200001135
FT10CF25Q01	Size10",RFCS,ACC±1.0%,Flow500-5000GPM/114-1140M3.H,WT290.8Kg	200001136
FT3/8x1/2SJ25Q01	Size3/8",End1/2",RJSS,ACC±1.0%,Flow0.3-3GPM/0.067-0.67M3.H,WT15.3Kg	200001137
FT1/2SJ25Q01	Size1/2",RJSS,ACC±1.0%,Flow0.75-7.5GPM/0.167-1.67M3.H,WT15.3Kg	200001138
FT3/4SJ25Q01	Size3/4",RJSS,ACC±1.0%,Flow2-15GPM/0.45-3.41M3.H,WT15.3Kg	200001139
FT7/8x1SJ25Q01	Size7/8",End1",RJSS,ACC±1.0%,Flow3-30GPM/0.67-6.8H,WT18.16Kg	200001140
FT1SJ25Q01	Size1",RJSS,ACC±1.0%,Flow5-50GPM/1-11M3.H,WT18.16Kg	200001141
FT1.5SJ25Q01	Size1.5",RJSS,ACC±1.0%,Flow15-180/3-41M3.H,WT27.2Kg	200001142
FT2SJ25Q01	Size2",RJSS,ACC±1.0%,Flow40-400GPM/9-90M3.H,WT36.32Kg	200001143
FT3SJ25Q01	Size3",RJSS,ACC±1.0%,Flow80-800GPM/18-181M3.H,WT56.75Kg	200001144
FT4SJ25Q01	Size4",RJSS,ACC±1.0%,Flow100-1200GPM/23-271M3.H,WT83.99Kg	200001145
FT6SJ25Q01	Size6",RJSS,ACC±1.0%,,Flow200-2500GPM/45-583M3.H,WT177.1Kg	200001146
FT8SJ25Q01	Size8",RJSS,ACC±1.0%,Flow350-3500GPM/79-795M3.H,WT272.4Kg	200001147
FT10SJ25Q01	Size10",RJSS,ACC±1.0%,Flow500-5000GPM/114-1140M3.H,WT290.8Kg	200001148
FT3/8x1/2CJ25Q01	Size3/8",End1/2",RJCS,ACC±1.0%,Flow0.3-3GPM/0.067-0.67M3.H,WT15.3Kg	200001149
FT1/2CJ25Q01	Size1/2",RJCS,ACC±1.0%,Flow0.75-7.5GPM/0.167-1.67M3.H,WT15.3Kg	200001150
FT3/4CJ25Q01	Size3/4",RJCS,ACC±1.0%,Flow2-15GPM/0.45-3.41M3.H,WT15.3Kg	200001151
FT7/8x1CJ25Q01	Size7/8",End1",RJCS,ACC±1.0%,Flow3-30GPM/0.6-6.8M3.H,WT18.16Kg	200001152
FT1CJ25Q01	Size1",RJCS,ACC±1.0%,Flow5-50GPM/1-11M3.H,WT18.16Kg	200001153
FT1.5CJ25Q01	Size1.5",RJCS,ACC±1.0%,Flow15-180/3-41M3.H,WT27.2Kg	200001154
FT2CJ25Q01	Size2",RJCS,ACC±1.0%,Flow40-400GPM/9-90M3.H,WT36.32Kg	200001155
FT3CJ25Q01	Size3",RJCS,ACC±1.0%,Flow80-800GPM/18-181M3.H,WT56.75Kg	200001156
FT4CJ25Q01	Size4",RJCS,ACC±1.0%,,Flow100-1200GPM/23-271M3.H,WT83.99Kg	200001157
FT6CJ25Q01	Size6",RJCS,ACC±1.0%,,Flow200-2500GPM/45-583M3.H,WT177.1Kg	200001158
FT8CJ25Q01	Size8",RJCS,ACC±1.0%,,Flow350-3500GPM/79-795M3.H,WT272.4Kg	200001159
FT10CJ25Q01	Size10",RJCS,ACC±1.0%,Flow500-5000GPM/114-1140M3.H,WT290.8Kg	200001160
If you would like to have a quotation on the products, please input Quantity then click →